移動式升降平臺液壓機的維護保養方法有什么？給大家說一說移動式升降平臺液壓機的維護保養方法：

What are the maintenance methods of mobile lifting platform hydraulic press? Tell us about the maintenance methods of the hydraulic press of the mobile lifting platform:

移動式升降平臺的液壓系統是全部機器設備的主動脈，決策著升降平臺的正常運行，一旦出現難題不僅危害工作效率高并且存有一定風險；因而液壓系統的維護保養要搞好，那么關鍵有什么流程呢

The hydraulic system of the mobile lifting platform is the aorta of all machinery and equipment, which determines the normal operation of the lifting platform. Once there is a problem, it not only endangers the high work efficiency, but also has a certain risk; Therefore, the maintenance of the hydraulic system should be done well, so what is the key process

一、維持液壓系統清潔

1、 Keep the hydraulic system clean

移動式升降平臺中的液壓機油是液壓系統的性命。液壓系統中有很多高精偶件，有的有減振小圓孔.有的有間隙等；若固態雜質侵入將導致高精偶件挫傷、開卡、油道阻塞等，嚴重危害液壓系統的運作。一般固態雜質侵入液壓系統的方式有：加油和檢修，維護保養不小心；液壓件起屑等。

The hydraulic oil in the mobile lifting platform is the life of the hydraulic system. There are many high precision coupling parts in the hydraulic system, and some have small round holes for vibration reduction Some have gaps, etc; If solid impurities invade, it will lead to contusion, card opening, oil passage blockage, etc. of high-precision coupling parts, which will seriously endanger the operation of hydraulic system. The general ways of solid impurities invading the hydraulic system are: refueling and overhaul, careless maintenance; Scraping of hydraulic parts, etc.

能夠從下列好多個層面避免固態雜質侵入系統軟件：

It can prevent solid impurities from invading the system software from the following aspects:

①加油時

① When refueling

齒輪油務必過慮充注，加油專用工具應經常清潔。不可以以便提升加油速率而除掉汽車油箱加油出口處的過濾裝置。加油工作人員應用整潔的膠手套和工作服裝，防止固態雜質和化學纖維雜質跌入油中。

The gear oil must be overfilled, and the special tools for refueling should be cleaned frequently. It is not allowed to remove the filtering device at the refueling outlet of the automobile fuel tank in order to improve the refueling rate. Refueling personnel shall use clean rubber gloves and work clothes to prevent solid impurities and chemical fiber impurities from falling into the oil.

②維護保養時

② During maintenance

移動式升降平臺的拆裝液壓油濾芯加油蓋、濾芯蓋、監測孔、高壓油管等位置，導致系統軟件油道曝露時要繞開工地?fù)P塵，拆裝位置要先完全清潔后才可以開啟。如拆裝液壓油濾芯加油蓋時；先去除油蓋四周的土壤，擰下來油蓋后，解決殘余在結合部位的臟物（不可以自來水清洗以防水滲到汽車油箱），確定清潔完畢后才可以開啟油蓋。如需應用擦洗原材料和錘子時，應挑選不出化學纖維雜質的擦洗原材料和敲擊面粘附硫化橡膠的專用型錘子。

When the hydraulic oil filter element filler cap, filter element cap, monitoring hole, high-pressure oil pipe and other positions of the mobile lifting platform are disassembled, the system software oil duct shall be exposed to avoid the dust on the construction site. The disassembly position shall be completely cleaned before it can be opened. For example, when disassembling the filler cap of hydraulic oil filter element; First remove the soil around the oil cover, screw off the oil cover, and then solve the residual dirt at the joint part (do not wash with tap water to prevent water from seeping into the automobile fuel tank). After cleaning, open the oil cover. If it is necessary to use scrubbing raw materials and hammers, the scrubbing raw materials without chemical fiber impurities and the special hammer with vulcanized rubber adhered to the striking surface shall be selected.

液壓件、高壓膠管要用心清洗，用髙壓風輕輕吹干后拼裝。大伙兒要采用包裝完好無損的真品過濾芯，換機油時另外清洗濾芯，安裝過濾芯前運用擦洗原材料用心清潔濾芯殼內底端廢棄物。

Hydraulic parts and high-pressure rubber hoses shall be carefully cleaned and assembled after being gently dried with high-pressure air. Everyone should use the genuine filter element with intact packaging. When changing the engine oil, clean the filter element additionally. Before installing the filter element, use scrubbing raw materials to carefully clean the waste at the bottom of the filter element shell.

二、搞好液壓系統的清洗工作

2、 Do a good job in cleaning the hydraulic system

清洗油務必應用與系統軟件常用型號同樣的齒輪油，油溫度在45～80℃中間，用大總流量盡量將系統軟件中雜質帶去。液壓系統要不斷清洗三次左右，每一次清洗完后，趁油熱時將其所有釋放系統軟件。清洗結束再清洗濾芯、拆換過濾芯后充注新油。

The cleaning oil must be the same gear oil as the common model of the system software. The oil temperature is between 45 ~ 80 ℃. Use a large total flow to remove the impurities in the system software as much as possible. The hydraulic system shall be continuously cleaned for about three times. After each cleaning, release all the system software while the oil is hot. After cleaning, clean the filter element, remove and replace the filter element, and then fill with new oil.

移動式升降平臺液壓機系統軟件要搞好維護保養工作，不能麻痹大意；由于立即危害到工作效能和升降平臺的使用期，請大家要銘記！

The system software of the hydraulic press of the mobile lifting platform shall be well maintained, and shall not be careless; As it immediately endangers the work efficiency and the service life of the lifting platform, please remember!

以上就是為大家介紹的有關電動液壓貨梯的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務.

The above is a detailed introduction to the electro-hydraulic cargo elevator. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service