Hydraulic lift is one of many types of lifts, and it is widely used. When choosing the manufacturer of hydraulic elevator, we must be careful. If you choose a manufacturer with poor production quality, there may be many problems in the use process. The hydraulic lift should be operated by professionals. For newcomers who are not very familiar with this aspect but are simply trained, the operation is still a little difficult, and there may be some situations in the use process. For example, if the elevator can't rise, how should we deal with it? First of all, we should analyze the specific reasons, and the treatment methods are different for different situations.

一、負載物品過重。因為每臺升降機都有自己的噸數限制，如果物品的重量太高的話，就有可能出現起升無力升不起來的情況。如果是屬于這樣的情況，就應該減少物品負重，然后再嘗試一下是否可以升的起來。

1、 The load is too heavy. Because each elevator has its own tonnage limit, if the weight of the goods is too high, it may be unable to lift. If this is the case, you should reduce the load of the object, and then try to see if it can rise.

二、回油閥沒有關閉，這樣的情況應該及時旋緊回油閥。

2、 If the oil return valve is not closed, tighten the oil return valve in time.

還有一種情況是屬于回位失靈的情況。回位失靈有可能是由于手動泵單向閥卡死。這時候就應該將油閥閥門螺栓旋轉開，進行故障的檢修。如果卡死是由于液壓油，需要更換的就一定要及時進行更換。

There is also a case of return failure. The return failure may be due to the jamming of the check valve of the manual pump. At this time, the oil valve bolt should be rotated open for troubleshooting. If the jamming is due to hydraulic oil, it must be replaced in time if it needs to be replaced.

還有可能是由于齒輪泵出現了損壞，改善升不上去的情況應該對受損的齒輪泵進行更換。

It is also possible that the gear pump is damaged, and the damaged gear pump should be replaced to improve the situation that it cannot be lifted.

五個原因，手動泵齒輪泵出現嚴重漏油的情況。

There are five reasons: the gear pump of manual pump has serious oil leakage.

六、一定要加足液壓油在進行啟動，如果加足不足，也有可能出現升降階升不起來的情況。

6、 Be sure to add enough hydraulic oil before starting. If it is insufficient, the lifting step may not rise.

七、出現電路斷路。這時候就應該請人員進行檢查，要檢查保險絲還有按鈕接觸器。

7、 There is an open circuit. At this time, professionals should be invited to check the fuse and button contactor.

八、也有可能是因為濾清器出現了堵塞的情況，這時候就應該清洗或者予以更換。

8、 It is also possible that the filter is blocked, so it should be cleaned or replaced at this time.

以上就是為大家介紹的有關升降機廠家的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.61nx.cn

The above is a detailed introduction about the elevator manufacturer, which I hope will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.61nx.cn